0


Preparation:
  • Charge your Samsung SM-G928F Galaxy S6 Edge Plus battery to more than 80%.
  • Copy any stored data on your phone's internal memory, In case you want to keep them.
  • It is recommended to do Factory Reset before installing the Rooted firmware.
  • Install the Samsung USB Driver on your PC (If it is not already installed).
  • Enable OEM Unlocking and USB Debugging Mode in your phone settings.



Downloads:

Rooting Steps:
  • Extract the Samsung SM-G928F Rooted Firmware, You will get *.TAR.MD5 file.
  • Run Odin3.exe flasher as administrator.

  • Make sure that only Auto Reboot and F.Reset Time options are checked.
  • Click on AP button and select the extracted *.tar.md5 file.

  • Turn off your Galaxy S6 Edge Plus, And wait for 15 seconds.
  • Put the phone into Download Mode by pressing and hold Volume Down, Home and Power buttons together

  • Connect the phone to your PC using the USB cable.
  • Wait until Odin3 detects the COM port number of your connected phone.


  • Click on Start button to install the Rooted firmwar

  • Do nothing until Odin3 reboots your phone.
  • Your phone will be rebooted automatically, So wait for it.
  • When you see PASS! Word in green at Odin3 flasher, You can disconnect the phone.
Congratulations, You have rooted your Samsung Mobile.
Done, Now you have SuperSU app installed on your phone.

Remember:
  • Make sure to download the suitable firmware version for your phone.
  • Keep in mind that you are going to use this ROM on your own Responsibility.
  • In case your phone stuck at Bootloop, Then you can reflash it with any Stock Firmware to fix it.

Post a Comment

 
Top