Download Intex Aqua Star 5.0 Flash File Firmware With Tool
Instructions:
Before flash make full backup (if Stucked at Logo or Dead Then Flash Directly)
Battery Should be minimum 50% .
Check any Defect in USB Cabel
Match File Versions with Label backside of phone Under battery.
2)Start Sp Flash Tool then Select Scatter file find in Firmware folder
Switch Off your phone , click Download / upgrade button on sp flash tool
3)After Click Connect usb cable from pc to mobile phone . flashing started
4)Please wait for flash update completed
After 5-15 minutes can you see the green ring flashing Done
Flash File Download :
Google Drive
Instructions:
Before flash make full backup (if Stucked at Logo or Dead Then Flash Directly)
Battery Should be minimum 50% .
Check any Defect in USB Cabel
Match File Versions with Label backside of phone Under battery.
How To Flash Intex Aqua Star 5.0
1) Download Firmware (Flash File) And Unzip File (Extract) To Pc Download Flash Tool, Usb Driver And Install to your pc2)Start Sp Flash Tool then Select Scatter file find in Firmware folder
Switch Off your phone , click Download / upgrade button on sp flash tool
3)After Click Connect usb cable from pc to mobile phone . flashing started
4)Please wait for flash update completed
After 5-15 minutes can you see the green ring flashing Done
Flash File Download :
Google Drive
Post a Comment